Part Breakdown
| Reference Number | Part Number | EDP Number | Description | Required |
| 1 | BAC-53 | 41110 | Pipe plug, 1/8" NPT | 4 |
| 1 | 41120 | 41120 | Pipe plug, 1/8" NPT, stainless steel (optional) | 4 |
| 2 | 5AC-10 | 30100 | Volute, 1-1/4" x 1", cast iron | 1 |
| 3 | GE-26-A | 42161 | Impeller, cast iron, right hand 5/8" thread 1 | 1 |
| 4* | GE-8-V-A | 42132 | O-ring, shaft sleeve, Viton | 1 |
| 5 | GE-6-SS-A | 42105 | Sleeve for 1" OD shaft, stainless steel | 1 |
| 6* | GE-7-V | 42120 | Seal, 1" Type 6 mechanical seal, Viton | 1 |
| 7* | 31040 | 31040 | Gasket, volute, 4 hole | 1 |
| 8 | GE-9-A | 42151 | Bracket, cast iron | 1 |
| 9 | GE-60 | 42230 | Cap screw, 5/16" NF x 3/4" | 4 |
| 9 | GE-60-SS | 42235 | Cap screw, 5/16" NF x 3/4", stainless steel (optional) | 4 |
| 10 | GE-54 | 42220 | Slinger | 1 |
| 11 | 40950 | 40950 | Cap screw, 3/8" NC x 3/4" | 4 |
| 11 | 40930 | 40930 | Cap screw, 3/8" NC x 3/4", stainless steel (optional) | 4 |
| # | GE-1-A | 42060 | 3-1/2 HP gasoline engine, Briggs & Stratton | 1 |
| # | GE-2 | 42070 | Handle (optional) | 1 |
| # | GE-3 | 42080 | Steel base (optional) | 1 |
| # | GE-62 | 42250 | Cap screw, 5/16" NC x 1-1/2", engine to base | 4 |
| # | 42270 | 42270 | Nut, 5/16" NC hex, engine to base | 4 |
| # | RK-GE-100-A | 60855 | Repair kit for GE-100-A | # |
Technical Specifications
- Part #:
- GE-100-A
- Manufacturer:
- Ace Pumps
- Material:
- Cast Iron
- Ace Pumps EDP #:
- 60400
- Horsepower:
- 3.5
- Inlet:
- 1-1/4" NPT
- Maximum Flow Rate (GPM):
- 50
- Maximum Pressure (PSI):
- 50
- Outlet:
- 1" NPT
- Power Type:
- Gas
- Pump Engine:
- Briggs & Stratton
- Material:
- Cast Iron
- Ace Pumps EDP #:
- 60400
- Horsepower:
- 3.5
- Inlet:
- 1-1/4" NPT
- Maximum Flow Rate (GPM):
- 50
- Maximum Pressure (PSI):
- 50
- Outlet:
- 1" NPT
- Power Type:
- Gas
- Pump Engine:
- Briggs & Stratton
- a_mpn:
- GE-100-A
